TRANSDUCER OF D.C. VOLTAGE OR CURRENT
$255.32
MANUFACTURER: LUMEL
MODEL: P20H
- Description
- Size Guide
- Vendor Info
- More Products
Description
TRANSDUCER OF D.C. VOLTAGE OR CURRENT
DESCRIPTION OF TRANSDUCER OF D.C. VOLTAGE OR CURRENT
Transducers of P20H series are applied for the continuous conversion of one quantity: high voltage or high current signal, uni or bipolar signal into a standard d.c. current or d.c. voltage signals, or into a digital form available through the RS-interface.
The transducer is configurable through the PD14 programmer. With the aid of the programmer and the LPCon program, one can reprogram following parameters:
– measurement averaging time,
– conversion characteristic,
– preservation of the output signal at overflows,
– narrowing of the output signal,
– RS485 transmission parameters,
The transducer has a galvanic separation between individual blocks:
– supply
– measuring inputs
– outputs and PD14 programmer
CHACTERISTICS
- Input:
- -100…0…+100 V, -600…0…+600 V d.c.,
- -1…0…+1 A, -5…0…+5 A d.c.,
- Output:: 0/4…20 mA, 0…10 V or RS-485 with MODBUS protocol.
- Output signal galvanically isolated from the input signal and the supply.
- Possible programming of following parameters through the PD14 programmer and the free eCon software.
- measurement averaging time,
- conversion characteristic,
- preservation of the output signal at overflows,
- transmission parameters through RS-485.
- Possible rescalling of the analog output acc. to the individual output characteristic.
- Accuracy class: 0.2
- Supply voltage: 85…253 Va.c. (45…65 Hz) or d.c.20…40 Va.c. (45…65 Hz) or d.c.
- Overall dimensions: 22.5 x 120 x 100 mm.
The transducer set is composed of:
– P20H transducer……………………………………… 1 pc
– user’s manual………………………………………….. 1 pc
– guarantee card……………………………………….. 1 pc
– protection plug of the programmer socket….. 1 pc
When unpacking the transducer, please check whether the type and
execution code on the data plate correspond to the order.
