1-Phase Network Parameter Transducer, P30P
1-Phase Network Parameter Transducer, P30P

1-Phase Network Parameter Transducer, P30P

Temperature & Standard Signal Transducer, P30U Temperature & Standard Signal Transducer, P30U
DC Signal Transducer With Data Logging, P30H DC Signal Transducer With Data Logging, P30H

$290.52

1-Phase Network Parameter Transducer, P30P

Manufacturer: LUMEL

Product Code: P30P

SKU: AM-5125-21
Add to wishlist

Description

PRODUCT DESCRIPTION

P30P is a titransducer which was designed to measure 1-phase power network parameters. It can measure and record up to 16 parameters

The output signal is galvanically isolated from the input signal and the power supply.
P30P has programmable measurement and additional functions.
Programming parameters can be realized with the use of buttons, via RS-485 interface and free e-con software or Ethernet

Transducer is available in 3 versions:

  • basic,
  • with SD/SDHC card,
  • with Ethernet and internal file system memory.

Features and functions:

  • Input:
    • analog (programmable): 1/5A
    • voltage: 100 or 230V
  • Output:
    • 1 x analog 0/4…20mA or 0…10V
    • 1 x relay, optionally changeable to 0/4…20mA or 0…10V analog output
    • 1 x additional relay, optionally changeable to 0…24V d.c. supply output
  • LCD 2 x 8 characters with LED backlight
  • Supply: 85..253 V a.c./d.c. or 20…40 V a.c./d.c., / 20…60 V d.c.
  • Conversion of measured values into an output signal on the base of the individual linear characteristic
  • 1 or 2 alarm relays with NO contact operating in 6 modes
  • Additional supplying output 24 V d.c 30 mA switched-on/switched-off (option).
  • Recording of input signals in internal file, on SD/SDHC card (option) or internal file system memory (option).
  • Interface RS-485 Modbus RTU.
  • RS-485 Master/Monitor mode – possibility to poll 1 device.
  • SD/SDHC support (option).
  • Interface Ethernet 10/100 BASE-T (opti on).
    • Protocol: Modbus TCP/IP, HTTP, FTP.
    • Services: www server, ft p server, client DHCP
  • Dimension: 45 x 120 x 100mm

SPECIFICATION

Input

1-phase power network parameters fixed, 1A (X/1A), 5A (X/5A),100 V(x/100 V) or 250 V

Output

1 x analog 0/4…20 mA or 0…10 V

1 x relay NO optionally exchangable with additional analog output 0/4…20 mA or 0…10 V

1 x additonal NO relay optionally exchangable with 24 V, 30 mA supplying output

Interface

RS-485 Modbus (Slave or Master) – standard

Ethernet 10/100 Base-T – option

Display

LCD 2 x 8 characters with LED backlight

Supply voltage

85…253 V a.c. , 85…300 V d.c or 24…40 Vav, 20…60 V dc

Protection rating

IP40 

Dimensions

45 x 120 x 100 mm 

Programming

using buttons or free eCon software using RS-485 Modbus, Ethernet (option)

Additional functions

alarms indicated on the display; internal memory 534336 samples; WWW server, FTP, ModbusTCP/IP Slave (option); data logging in internal memory or on SD card (option); rescaling (up to 21 points); memory of min. and max. values (with time stamp); mathematic functions independent for both inputs; memory of min and max values