Description

CMM-1H OIL PROCESSING UNIT

The СММ-1Н unit is designed for drying¹, heating² and filtration³ of mineral transformer oil⁴, as well as evacuation of transformer⁵ tanks.

The process is based on application of heat and vacuum⁶. The oil is heated and pumped to the vacuum chamber. The low pressure in the chamber makes the water in the oil boil and evaporate. The water vapor is removed with vacuum pump exhaust.

The СММ-1Н unit consists of the following elements: a frame, a centrifugal oil pump (output), a vacuum pump⁷, an electrical control cabinet, a vacuum chamber, filters⁸, an oil trap, piping, an instrument panel, an oil inlet and an oil outlet.

CMM-1H OIL PROCESSING UNIT SPECIFICATIONS:

*Note – Initial oil quality parameters:

• gas content: below 10.5 %;
• moisture content: below 0.01 % (100 ppm);
• temperature: above 0 °С.

CMM-1H OIL PROCESSING UNIT ADVANTAGES:

• the unit is equipped with a centrifugal output pump to reduce noise;
• the unit does not have an input pump, the oil goes directly into the unit with reduced risk of leaks;
• simple operation;
• a porous inset in the vacuum chamber facilitates efficient moisture separation;
• the smart heating system varies current for the required processing rate, eliminating voltage surges;
• a water condensate collection container is installed;
• the unit features a separate outlet for transformer evacuation.

MANUFACTURER:

COUNTRY OF ORIGIN: UKRAIN