CS-iTEC Portable Power meter S 110-P, Modbus/RTU
CS-iTEC Portable Power meter S 110-P, Modbus/RTU

CS-iTEC Portable Power meter S 110-P, Modbus/RTU

CS-iTEC Power meter S 110-W, Modbus/RTU,24 VDC CS-iTEC Power meter S 110-W, Modbus/RTU,24 VDC supply, wall mountable
8 Channel Analog Input Extension, Connectable to S 550, including 5 m Cable with Connector 8 Channel Analog Input Extension, Connectable to S 550, including 5 m Cable with Connector

$1,617.23

Portable power meter CS 110-W, Modbus/RTU,24 VDC supply, including 4 test leads, 4 test clips, 5 m cable with connector to CS 550

Manufacturer: CS-iTEC

Product code: AME-5125-1

SKU: 0554 0034
Add to wishlist

Description

CS-iTEC PORTABLE POWER METER S110-W, MODBUS/RTU, 24VDC SUPPLY, WALL MOUNTABLE

The Power Meters are designed for easy installation and high accuracy. It measures the actual power consumption in kW and accumulates the Energy consumption in kWh of  a 3-phase load. Additionally other measured parameters such as current, voltage, cos phi etc are available as well. Through 3 clamp sensors the current is sensed. Hat rail, wall mountable and portable versions are available.

Application

S 110_6

In above illustration a power meter is installed directly into the  connection box of the compressor. The current clamps can be easily fixed with fasteners around the supply wires. The voltage connection can be drawn from other available connection points. A separate cable connects the CS-iTEC power meter to the S 330/331 with Modbus/RTU and 24 VDC power supply. The power meter could also be installed into the connection cabinet where the power supply for the compressor is coming from. If no  mounting is available, there is a wall hat rail mountable and portable version of the CS-iTEC power meter.

 Product features

  • Actual power consumption in kW and kWh
  • Hat rail, wall casing or portable version available
  • Power range up to 690 kW
  • Three clamp sensor models 200 A, 500 A and 1000A for highly accurate measurement

Technical data

Nominal voltage (L-N, L-L) 277 / 480 VAC
Clamp sensor input range 0…1 A
Available clamp sensors 200 A, 500 A, 1000 A
Power range Up to  690 kW (depending on clamp sensor)
Accuracy Voltage: 0.2%
Current:  0.5%
Clamp:   class 1
Energy:  class 0.5
Output Modbus/RTU
Supply 24 V DC / 4 W
Operating Temperature -5…+55°C
Dimensions hat rail version: 110x90x31mm
wall version:      190x155x85mm
Portable:           177x177x60mm