CS-iTEC Power Meter S 110, hat rail mountable, Modbus/RTU
$892.46
CS-iTEC Power meter CS 110, hat rail mountable, Modbus/RTU
Manufacturer: CS-iTEC
Product code: AME-5125-0
- Description
- Size Guide
- Vendor Info
- More Products
Description
CS-iTEC POWER METER S 110, HAT RAIL MOUNTABLE, MODBUS/RTU
The Power Meters are designed for easy installation and high accuracy. It measures the actual power consumption in kW and accumulates the Energy consumption in kWh of a 3-phase load. Additionally other measured parameters such as current, voltage, cos phi etc are available as well. Through 3 clamp sensors the current is sensed. Hat rail, wall mountable and portable versions are available.
Application
In above illustration a power meter is installed directly into the connection box of the compressor. The current clamps can be easily fixed with fasteners around the supply wires. The voltage connection can be drawn from other available connection points. A separate cable connects the CS-iTEC power meter to the S 330/331 with Modbus/RTU and 24 VDC power supply. The power meter could also be installed into the connection cabinet where the power supply for the compressor is coming from. If no hat rail mounting is available, there is a wall mountable version of the CS-iTEC power meter.
Product features
- Actual power consumption in kW and kWh
- Hat rail, wall casing or portable version available
- Power range up to 690 kW
- Three clamp sensor models 200 A, 500 A and 1000A for highly accurate measurement
Technical data
| Nominal voltage (L-N, L-L) | 277 / 480 VAC |
| Clamp sensor input range | 0…1 A |
| Available clamp sensors | 200 A, 500 A, 1000 A |
| Power range | Up to 690 kW (depending on clamp sensor) |
| Accuracy | Voltage: 0.2% Current: 0.5% Clamp: class 1 Energy: class 0.5 |
| Output | Modbus/RTU |
| Supply | 24 V DC / 4 W |
| Operating Temperature | -5…+55°C |
| Dimensions | hat rail version: 110x90x31mm wall version: 190x155x85mm Portable: 177x177x60mm |
Vendor Information
-
Incubators, Dry Block Incubators and AccessoriesBlock, used for 0.2mL tubes, 54 holes
$175.00Select options This product has multiple variants. The options may be chosen on the product pageQuick View -
-
