Flow meter insertion type-VA 550 – Flow sensor for installation in existing compressed air or gas line of 3/4″ to DN 1000
$3,682.43
Flow meter insertion type-VA 550 –
Flow sensor for installation in existing compressed air or gas line of 3/4″ to DN 1000. VA 550 Flow meter, measuring head in robust aluminum die casting housing
- Description
- Size Guide
- TECHNICAL DATASHEET
- Vendor Info
- More Products
Description
Flow meter insertion type-VA 550 – Flow sensor for installation in existing compressed air or gas line of 3/4″ to DN 1000
Flow meter insertion type-VA 550–Special measurement technology features:
• 4 values on the display: Flow, total consumption, velocity, tem-perature. Units freely adjustable
• All measured values, settings such as gas type, inner diameter, serial number and so on can be accessed via Modbus-RTU
• Comprehensive diagnostic functions readable on the display or remote access via Modbus such as calibration cycle, error codes, serial number
• Notifi cation in case of exceeding the calibration cycle
• Standard version accuracy 1.5% of m.v. ± 0.3% of f.s.
• Precision version accuracy 1.0% of m.v. ± 0.3% of f.s
• Measuring span of 1 : 1000 (0.1 up to 224 m/s)
• Confi guration and diagnosis via display, hand-held device PI 500, PC service software on-site
• Gas type (air, nitrogen, oxygen, argon and so on) freely adjust-able via PC service software or external device DS 400, DS 500, PI 500
• Reference conditions °C and mbar/hPa freely adjustable• Zero-point adjustment, leak fl ow volume suppression
• Pressure loss negligible
Flow meter insertion type-VA 550–Flow sensor mechanical features:
• Robust impact-proof aluminium die cast housing for the outdoor area IP 67
• All wetted parts made from stainless steel 1.4571
• Suitable as an insertion version for 3/4″ to DN 1000
• On request with DVGW approval for natural gas (up to 16 bar)
• Pressure range up to 50 bar, special version up to 100 bar
• Temperature range up to 180 °C• No moveable parts, no wear
• Sensor tip very robust, easy to clean
• Easy installation and removal under pressure via 1/2″ ball valve
• Housing rotatable, display rotatable by 180°
• Safety ring for installation and removal under pressure
• Depth scale for precise installation
Flow meter insertion type-VA 550–Flow sensor Optional: Connection to different Bus systems
There are different options available for connection to modern Bus systems:
• Ethernet interface (Modbus-TCP) / PoE
• M-BUS
• Modbus-RTU
• Profi bus DP interface (in process)
• Profi net interface (in process)
• HART (in process)
