HY10.150.H4.K MULTIFUNCTIONAL SCALES
$0.00
Manufacturer: RADWAG
Product Code: WP-116-0018
- Description
- Size Guide
- Vendor Info
- More Products
Description
HY10.150.H4.K MULTIFUNCTIONAL SCALES
Product Description of HY10.150.H4.K MULTIFUNCTIONAL SCALES
Multifunctional scales HY10 series is designed to fast and precise determination of mass in industrial conditions.
- programmable display and function keys,
- designing custom printout templates,
- designing text data indicated on terminal display.
DOSING
Weighing process for which reference mass has been determined together with tolerance for its determination. Dosing tolerance is given in [%] and it is calculated in relation to the reference value thus being a permissible deviation of this process. This solution is used for weighing powders, liquids and loose materials. Dosing function performance is often supported with bar graph – load indicator. For industrial scales it is possible to use a control system of dosing process.
LABELLING
Marking products with the right symbols contributes to quick and reliable identification. The balance/scale usually transfers product mass or product quantity to the label printer. The transferred value is printed with the following information: bar code, pictogram, content, address etc. In laboratory the labeling is performed in a semi-automatic mode, for industry in an automatic one (dynamic scales).
PLUS/MINUS CONTROL
PERCENT WEIGHING
Percent weighing function is used for comparisons of measured products with mass standard. Mass of a mass standard may be a numeric value taken from a database or it may be determined through a measurement process. Each measured product is compared to mass standard, mass of which is presumed as a model 100% ideal mass. For products weighing less than the mass standard, obtained results are lower than 100%, for products weighing more, the obtained results are greatly exceeded.
TOTALIZING
Function adding new mass value to already obtained one. This allows determining mass content of the mixture, being a composition of number of different consistence components. Totalizing is limited by maximum capacity parameter.
PARTS COUNTING
Function using mass measurement for determination of measured items quantity. Mass of a single item is required for this process. It may be either estimated through weighment or taken from a database. For items counting the following algorithm is used: all items mass / single item mass = quantity. Function operation is supported by a mechanism of Automatic Correction of Accuracy. This allows updating single item mass in course of the process. To a certain extend Automatic Correction of Accuracy eliminates error which may be a result of different mass values of seemingly alike single elements. For industry solutions items counting may be simultaneously carried out with check weighing and dosing thus industry solutions feature audio signaling base informing that specified number of items has been weighed. It is possible to apply weighing systems using few platforms of different MAX capacities and different accuracies.
PEAK HOLD
Function registering the greatest temporary indication occurring in course of the weighing process. It is most often used in medical scales in order to hold the measurement indication.
FORMULATION
Function supporting the mixture making process, wherein the mixture contains various components. Formulation function usually uses the balance/scale database of components. Formulation serves for monitored check weighing of every single component with a given tolerance. It is enriched with a set of individual settings.
NEWTON UNIT MEASUREMENT
Function allowing to perform the measurement in Newton unit, it may be used for processes aiming to determine force resulting in the sample damage.
STATISTICS
Statistics function registers and analyses performed measurements. This supplies the user with the following information: Max and Min standard deviation, average value, variance, range et.
CHECKWEIGHING
Check weighing function is used for checking whether the measured sample mass is within the predefined threshold values, Low [LO] and High [HI]. The thresholds are given in [g] and [kg] units. Current state of a sample being measured is signaled by means of pictograms located on a display for laboratory balances, for industrial scales Stackligt System is used. This visual /- inspection is in operation during segregation, control or packing process of products for which mass has been determined with a specified tolerance, e.g. 12860 g 961
ANIMAL WEIGHING
Process of mass determination for a product which may unwillingly reposition within the weighing pan. Mass determination in such cases requires much longer period of time when compared to typical weighing process. It is the user who defines period of time needed for control of measured product mass. The user can thus optimize the function depending on the measured product characteristics.
DIFFERENTIAL WEIGHING
Differential weighing informs about mass variation a particular sample, wherein the said variation is a result of manufacturing processes.
Differential weighing is often applied in product control process, for which reference product parameters have been specified in order to be used as a source of comparison for the whole series.
In such case standard deviation is the information which tells about quality and completeness of a final product. For systems based on a feed-back technique such information may be used by control units.
Datasheet
| Max capacity [Max] | 150 kg |
| Readability [d] | 50 g |
| Verification scale interval | 50 g |
| Tare range | -150 kg |
| Adjustment | external |
| OIML Class | III |
| Display | 10,1″ widescreen colour dispaly 1024×600 |
| IP rating | IP 68 construction, IP 68 (1h max)/69 indicator |
| Power supply | 100 ÷ 240 V AC 50 ÷ 60 Hz |
| Working temperature | -10 ÷ +40 °C |
| Atmospheric humidity | 10÷85% RH no condensation |
| Pan Size | 500×500 mm |
| Net weight/gross weight | 24 / 26 kg |
| Packaging size | 840×600×400 mm |
| Interface | 2×RS 232, 2×USB, Ethernet, 4 IN / 4 OUT |
