LP200 SERIES-PP PVDF IN-LINE PRESSURE TRANSMITTER
$680.52
LP200 SERIES-PP PVDF IN-LINE PRESSURE TRANSMITTER
Manufacturer: ICON PROCESS
Product Code: LP200-PP
Industry’s Most Chemical Resistant Pressure Sensor
All Wetted PP, PVDF and Ceramic
The Levelpro LP200 was designed to Measure Pressure or Level within industry’s most demanding Corrosive Process applications . When measuring pressure It can be mounted vertically or horizontally, and can easily be installed into any 3/4″ NPT Process Pipe Tee Fitting. For Level measurement applications the LP200 can simply be mounted into the side of the tank utilising a 3/4″ NPT bulkhead or weld-o-let fitting
Features
- PP 316 SST Body
- Large Range : 0 – 225 Psi
- Output : 4-20mA -2 Wire Loop Powered
- ¾” NPT Connection
- Ceramic Sensing Diaphragm
- Plus & Play Design
- High Accuracy
- No Programming Required
- Temperature Compensated
- Tank Level Measurement
- Description
- Size Guide
Description
Description
LP200 SERIES-PP PVDF IN-LINE PRESSURE TRANSMITTER
Industry’s Most Chemical Resistant Pressure Sensor
All Wetted PP, PVDF and Ceramic
The Levelpro LP200 was designed to Measure Pressure or Level within industry’s most demanding Corrosive Process applications . When measuring pressure It can be mounted vertically or horizontally, and can easily be installed into any 3/4″ NPT Process Pipe Tee Fitting. For Level measurement applications the LP200 can simply be mounted into the side of the tank utilising a 3/4″ NPT bulkhead or weld-o-let fitting
Features
- PP 316 SST Body
- Large Range : 0 – 225 Psi
- Output : 4-20mA -2 Wire Loop Powered
- ¾” NPT Connection
- Ceramic Sensing Diaphragm
- Plus & Play Design
- High Accuracy
- No Programming Required
- Temperature Compensated
- Tank Level Measurement
Typical Applications
- Chemicals (Acids + Bases)
- Tank Level
- Industrial Process Piping
- Vapor Pressure
- Leak Detection Equipment
- Environment Protection
- Scrubbers Filter or Strainer Notification
- Leachate Collection
- Weir Flow
- Scrubbers
Technical Parameters
| Range | 0 – 225 Psi |
| Medium | Gas & Liquid |
| Accuracy | 0.02% or 0.05% F.S |
| Working pressure | 18~36V DC |
| Output signal | 4~20mA (two-wire), |
| Medium temp | -30 ~ 85°C |
| Environment temp | -30 ~ 80°C |
| Store temp | -30 ~ 80°C |
| Temp. effect | ±0.02% FS |
| Pressure connector | ¾” NPT |
| Connection | DIN Hirschminn Connector, |
Working Principle
The LP200 implements a state of the art Ceramic measuring principle that changes the physical pressure which equates to no more than a few microns into a linear electronic signal that can be measured.
This minimal deformation equates to negligible material strain of the ceramic electronic pressure-sensing diaphragm resulting in high resistance to alternating loads and long-term durability. Exactly what is required for Tough Industrial Applications.
