MicroBio MB1 Bioaerosol Sampler
$1,127.84
Manufacturer: Cantium Scientific
Model: MB1 – 400
P/N: A-00024-400
- Description
- Size Guide
- Vendor Info
- More Products
Description
MicroBio MB1 Bioaerosol Sampler
Description of MicroBio MB1 Bioaerosol Sampler
The MicroBio MB1 bioaerosol sampler is the simplest to use and most economical microbial air sampler of its kind. It has been fully validated and thousands of units have sold worldwide.
The Affordable Microbial Air Sampler
The MicroBio MB1 bioaerosol sampler is capable of using both a 90 mm Petri Dish or 55 mm contact plates with 220 and 400 hole sampling head option. Using standard readily available consumables at low cost with a variety of media makes the MicroBio MB1 an economical instrument to use. The MicroBio MB1 bioaerosol sampler is an invaluable device for use in food and packaging quality assurance, indoor air quality and education.
Supplied with:
- Petri dish and contact plate spring sets
- Stainless Steel Sampling head
- Printed Manual
- Carry bag
- Multi-voltage world-wide charger with international plugs and 12V in-car plug
- Ansmann maxE NiMH cells
- Certificate of Calibration
SPECIFICATION
| MB1 – 220 Hole | MB1 – 400 Hole | |
|---|---|---|
| Sample head | 220 holes x 1mm Stainless steel |
400 holes x 0.7mm Anodised Aluminium |
| Autoclavable | ✓ | ✓ |
| Flow (L/min) | 100 | 100 |
| Sampling Volume per Sample (litres) | 10 – 2,000 | 10 – 2,000 |
| Autonomy (litres) | > 60,000 | > 60,000 |
| User defined volumes | × | × |
| d50 (um) | 1.7 | 1.35 |
| Particle velocity (m/s) | 9.65 | 10.83 |
| LCD display | × | × |
| Microprocessor Control | ✓ | ✓ |
| Start delay | 1 to 60 minutes | 1 to 60 minutes |
| 90mm Petri | ✓ | ✓ |
| 55 mm contact | ✓ | × |
| Weight (kg) | 0.75 | 0.72 |
| Tripod mount | × | × |
| Dimensions | 196 x 100 x 108 mm with attached sampling head | |
| Battery | 4 x AA NiMH cells, 6V | |
| Battery replacement | User replaceable for under £15 | |
| Fast charger (minutes) | 100 | |
| Charger | UK, Euro, USA, Australia and 12V in-car | |
| Carry Case/Bag | ✓ | |
| DTI VAM Validated | ✓ | |
| Warranty | 2 years | |
Sampling Head Option
The MicroBio MB1 can be purchased with the option of one of two types of sampling heads. The MicroBio MB1 will be calibrated for use with the selected head. If swapping to another head type, the MicroBio MB1 must be re-calibrated.
220 x 1 mm hole stainless steel head
This is the standard head sold with the MicroBio MB2 and MB1 air samplers. It is designed as a dual purpose head for both 55/60mm contact plates or up to 90mm Petri dishes. The d50 cut-off point of 1.7 um and has a jet velocity of 9.63 m/s. It is the ideal head for general purpose sampling in air quality and food production.
MicroBio 220 Hole Sampling Head
400 x 0.7 mm hole anodised aluminium head
Available as a no-cost option, this head provides full coverage of 90mm Petri dishes with a d50 point of 1.35 um and air jet velocity of 10.7 m/s. These heads are ideal for use in areas needed higher sensitivity of collection.
MicroBio 400 Hole Sampling Head
Vendor Information
- Address:
-
Air Monitoring & Sampling, Consumables, Dust & Aerosol Detection & Monitoring, Environmental Quality & Occupational health Monitoring, Featured, Handheld Dust detective Instrument – Microdust Pro, Instrumentation Products, Noise Monitoring, Noise Monitoring & Recording, Personal Sampling Pumps – Apex, Portable Dust detective kits, Promotion, Remote Dust monitoring system, Remote Multi Parameter (Noise & Dust) Monitoring System, Remote Multi Parameter (Noise & Dust) Monitoring System, Remote Noise Monitoring SystemNoise Guardian WSD
$17,535.09 -
-
