Online Refractometer Sensor JH-S
$3,145.50
MANUFACTURER : JIAHANG
ITEM NO : JH-S
- Description
- Size Guide
- Specification
- Product Document
Description
Online Refractometer Sensor JH-S
The measurement of Online Refractometer Sensor starts automatically 10 seconds after power-on, and the default measurement is once every 5 seconds. You can see the green light flashing on the back panel. Analog output: 24V 4 ~ 20mA. Data output: RS485 communication mode. Baud rate: 115200 bps, Check bit: N, data bit: 8, stop bit: 1 The measured value is automatically output after the measurement. Data format: temperature, Brix, refractive index For example: the following picture shows 7.8℃, Brix 10.5%, refractive index 1.3496
Online Refractometer Sensor Access method
Color definition of interface cable:
1.white/white 4-20ma
2.brown/brown—–4-20ma GND
3. Green/green connect to the earth (power protection)
4. Yellow/yellow connect to the earth (485 protection)
5. Gray/Gray 485 A+/TXD
6.pink/pink 485 B-/RXD
7, blue/blue 24V-
8. red/red 24V+
9. Thick black (shield layer) plug metal ring
Forms of work Online Refractometer Sensor
The measurement starts automatically 10 seconds after power-on, and the default measurement is once every 5 seconds. You can see the green light flashing on the back panel. Analog output: 24V 4 ~ 20mA.
Data output: RS485 communication mode. Baud rate: 115200 bps,
Check bit: N, data bit: 8, stop bit: 1
The measured value is automatically output after the measurement.
Data format: temperature, Brix, refractive index
For example: the following picture shows 7.8℃, Brix 10.5%, refractive index 1.3496
JH-S series model JH-S 102 Brix online concentration sensor.
Measuring range
|
Brix 0.0 ~ 80.0% | Resolution
|
Brix 0.1% |
Refractive index 1.3330~1.4910 | Refractive index 0.0001 | ||
Temperature 0.0 ~ 60.0℃ | Temperature 0.1℃ | ||
measurement accuracy |
Brix±0.2% | Ambient temperature | 0.0 ~ 60.0℃ |
Refractive index±0.0003 | Sample size | Immersion measurement | |
Temperature±0.5℃ | Withstand voltage | 1MPa | |
1 measurement in 5 seconds by default | Protection level | Measurement part IP67 | |
Thread, flange, chuck, etc. Support customization. | |||
measure time
Installation method
|
Analog output: 24V 4~20mA corresponding to Brix concentration 0.0~80.0% (support customization) | ||
Digital output: RS485 | |||
Other output methods can be customized. | |||
DC +24V±10% current <100mA |