SA Insertion Saddles - PVC
SA Insertion Saddles - PVC

Truflo® SA Insertion Saddles – PVC | 2″-16″

tir-insertion-paddle-wheel-flow-meter Truflo® TIR Insertion Paddle Wheel Flow Meter | ½”-24″
wooden case for humimeter bl2 Wooden case for humimeter BL2 moisture meter

Price range: $282.01 through $1,205.42

Truflo® SA Insertion Saddles – PVC | 2″-16″

Manufacturer: ICON PROCESS CONTROLS

Clamp-On Saddle Fittings
> PVC Material
> Viton® O-Rings
> Available in Metric DIN
> Will Accept Signet® Type Flow Meter

SKU: N/A
Clear
Add to wishlist

Description

Truflo® SA Insertion Saddles – PVC | 2″-16″

Clamp-On Saddle Fittings
> PVC Material
> Viton® O-Rings
> Available in Metric DIN
> Will Accept Signet® Type Flow Meter

SA Insertion Saddles - PVC.1

 

INSTALLATION

STEP 1

Identify the point of installation and make sure the external surface of the pipe is free from soil, imperfections or indentations in the area of contact with the gasket.

Position the gasket in the saddle seat.

Place the lower part of the saddle (i.e. the base) in the chosen point.
Couple the upper part of the saddle (i.e. the branch) with the lower one.

Insert the screws from below (the bottom part of the saddle has a recess to receive the head of the screws). Tighten the nuts alternately.

Drill a hole in the pipe wall being careful not to damage the saddle screw thread and the O-ring. Use a spacer to avoid drilling the other side of the pipe. It would be better to use a milling drill not to damage the saddle screw thread and the O-ring and in order to reduce the scraps into the pipe.

STEP 2

Clamp saddles – alternative procedure –

Draw a reference point on the pipe to allow repositioning of the saddle. Remove the saddle from the pipe.

Drill the hole in the pipe wall and remove the scraps.

Assemble the saddle according to the marked lines; to keep the hole in axis with the branch direction It can help to use a pin, such as the drill used to make the hole.

STEP 3

ALWAYS PRESSURE-TEST SYSTEM FOR LEAK TIGHTNESS PRIOR TO PUTTING INTO SERVICE.

Users Responsibility

Ensure pipe is correct specification and that valves, fittings and pipe meet local authority requirements.

Chemical Resistance— for special applications check suitability of materials with manufacturer.

 

SA Insertion Saddles - PVC

Additional information

Size

2", 3", 4", 6", 8", 10", 12", 14", 16"

Clamp-Saddles-Installation-Manual

Size Part Number
2″ SA020
3″ SA030
4″ SA040
6″ SA060
8″ SA080
10″

12″

14″

16″

 SA100

SA120

SA140

SA160

  

 

 

 

 

Vendor Information