Viber M2 1 channel
$1,256.62
Viber M2- 1 Channel
Manufacturer: VMI-AB
Product Code: –
- Description
- Size Guide
- Vendor Info
- More Products
Description
Viber M2 1 channel
Features of Viber M2 1 channel:
The channel has:
– Three measuring ranges
– Two independent alarm levels with manual or auto reset
– Two selectable frequency ranges
– Current output proportional to the vibration level 4-20 mA, suitable for connection to a PLC
– Monitoring of transducer and cable failure
– Analysis signal on BNC and terminal output
– Two independent changeover relays
– Two independent time delays of relay function
– One changeover relay for transducer or cable
Description:
The transducer signal is compensated in the input amplifier to correct signal level and selected frequency range. This signal is available at the front panel BNC connector and on terminals for further analysis.
The vibration always measured in velocity. This signal can be amplified in 3 selectable ranges 0-10, 0-20 and 0-100 mm/s. Other ranges are optional upon order of the product. When the preset signal levels are reached a LED lamp is lit. If the levels stays higher during the selected delay time (0-30 s) the relay is activated. The VIBER M2TM has manual or automatic resetting of the alarm status.
The signal level is converted to a corresponding current output between 4-20mA.This signal is available on terminals for connection to other instruments or data logger. The current output is disabled in case of transducer or cable failure.
Enclosure:
Sealed (IP65), PVC box with transparent lid for overview of vibration and/or temperature levels, alarm settings and alarm status.
