WIRE TRACER LKZ-720 CABLE DETECTOR

$1,087.35

WIRE TRACER

MODEL: LKZ-720 CABLE DETECTOR

MANUFACTURER: SONEL

The LKZ-720 CABLE DETECTOR features are:

  • the function 3D in the receiver – detecting the direction of current
  • receiver operation with four transmitters at the same time to locate interruptions or distinguish wires
  • a LED bright torch
  • headphone socket in receiver
  • screens backlight for work in dark
  • transmission battery status and settings of the transmitter to the receiver
  • measurement of voltage at the object to 500 V RMS
  • three levels of transmitter amplification
  • automatic or manual selection of transmitter operation modes
  • software upgrade via USB
SKU: AME-51-9

Description

SONEL WIRE TRACER LKZ-720 CABLE DETECTOR

The wire tracer LKZ-720 cable detector is designed for detection of wires and cables (live or not) in ceilings,walls and floors. The LKZ-720 cable detector is also used for tracing underground cables, tracing conductive water and heating pipelines. It ensures flow and accurate locating the object as well as phase detection mode.

The wire tracer LKZ-720 cable detector operates in wide range of rated voltage, up to 500 V RMS. There are five modes of wire tracer operation – voltage, current, current-voltage, power and clamp.

The additional accessories of the LKZ-720 cable detector enables precise localization – such as contact or non-contact probes and measurement clamp.

With a 3D receiver display, the Sonel LKZ-720 cable detector instrument is suited to finding, tracing, identifying and phasing of all types of building cables, conduits and pipes.

 

LKZ-720 | Location of cords and cables, fault detection | Devices | | Sonel S.A. - Przyrządy pomiarowe, kamery termowizyjne

 

FEATURES OF WIRE TRACER LKZ-720 CABLE DETECTOR

  • the function 3D in the receiver – detecting the direction of current
  • receiver operation with four transmitters at the same time to locate interruptions or distinguish wires
  • a LED bright torch
  • headphone socket in receiver
  • screens backlight for work in dark
  • transmission battery status and settings of the transmitter to the receiver
  • measurement of voltage at the object to 500 V RMS
  • three levels of transmitter amplification
  • automatic or manual selection of transmitter operation modes
  • software upgrade via USB

STANDARD ACCESSORIES FOR LKZ-720 CABLE DETECTOR

The LKZ-720 is supplied ready to use with:

  • LKN-720 transmitter and  LKO-720 receiver,
  • test lead with banana plugs; 1 kV; 3.9 ft (1.2 m); red
  • red crocodile clip 1 kV 20 A
  • test probe with banana socket;1 kV; red
  • test lead with banana plugs; 1 kV;3.9 ft (1.2 m); blue
  • blue crocodile clip 1 kV 20 A
  • test probe with banana socket;1 kV; blue
  • test lead with banana plugs on reel; 1 kV; 65.6 ft (20 m); red
  • earth contact test probe (rod) 0.8 ft (26 cm)
  • non-contact probe
  • mini-USB cable

Technical specification for LKZ-720 Cable detector

  • insulation type:    double, acc. to EN 61010-1
  • transmitter measurement category:    III 600 V acc. to EN 61010-1
  • transmitter ingress protection rating acc. to EN 60529:    IP67
  • receiver ingress protection rating acc. to EN 60529:    IP40
  • transmitter power supply:    4 x AA alkaline batteries or 4 x Ni-MH rechargeable batteries
  • maximum transmitter operating voltage:    500 V RMS
  • maximum depth of the analysed object:    (“I” mode) 6.6 ft (2 m)
  • maximum range of contactless neon probe: in air 19.7” (50 cm) and in concrete 2.0” (5 cm)
  • receiver power supply:    9 V 6LR61 alkaline battery
  • operating temperature:    +14°F…+122°F (-10°C…+50°C)