Microbial Air Sampler – TRIO.BAS SATELLITE UNIT Petri PACK

Microbial Air Sampler – TRIO.BAS SATELLITE UNIT Contact PACK
Microbial Air Sampler – GAS TEST with TRIO.BAS MINI 100 Contact PACK

$1,931.18

Microbial Air Sampler

Man: Trio.Bas

Cat No: 261K

 

SKU: EA-5380-83
Add to wishlist

Description

Microbial Air Sampler – TRIO.BAS SATELLITE UNIT Petri PACK

Microbial Air Sampler - TRIO.BAS SATELLITE UNIT Petri PACK

DESCRIPTION OF Microbial Air Sampler – TRIO.BAS SATELLITE UNIT Petri PACK

  • Attached to a TRIO BAS ISOLATOR with dome of its functions described below
  • Main customers are pharmaceuticals, cleanrooms and biotech industries.
  • The The RABS ISOLATOR and the satellites are made in AISI 316 stainless steel.
  • This air sampler is especially dedicated to customers who make a large number of controls, in different environments, with a large staff rotation and comply with the quality standards and QM/GMP
  • A barcode module, thanks to the use of a scanner (barcode reader) with Bluetooth, automatically records the operator, place and plates used for the sampling. The data collected by the barcode reader are transmitted directly to the instrument. This solution is useful for those who already use culture plates with barcode or 2-D barcode (QR Quick Response Code). The data collected are transferred via Bluetooth from the air sampler to a PC or laptop. PC or laptop request a dedicated software (ASPC) installed.
  • The data are transferred via Bluetooth between the air sampler and a smartphone or tablet (Android version) and then to a PC or laptop.
  • It is possibile to work either in manual or automatic mode.
  • The data may be transferred via cable, too. This is helpful for all companies that, due to internal policy, are not allowed to use the wireless transfer.
  • The battery is recharged by a power cable connected directly to the air sampler.
  • While under charging, the air sampler can sample.
  • The 200 lts/min air flow reduces the operator time and the time sampling.
  • This air sampler allows to monitor separated cleanrooms with a single external command unit. The risk of human contamination is reduced, because the satellite units are permanently inside each cleanroom
  • The use of sterile Daily Shift aspirating heads reduces the risk of contamination.
  • The possibility to use 2/3 different aspirating heads allows to have 2/3 different culture media at the same time or to make sampling BEFORE (at rest), DURING (in operation) and at the END of each processing cycle.

PERFORMANCES

  • Stainless steel AISI 316 (command unit + satellite units)
  • Complaint according EN/ISO 14968-1, GMP and GLP
  • Stainless steel aspirating head with quick bayonet closure, identification number and stainless steel cover to prevent contamination
  • Volume of aspirating air: 100 or 200 l/m
  • Selected volumes from 30 to 2.000 liters and 17 preset programs
  • The aspirating chamber is suitable for 55 mm Contact plates or 90 mm Petri dishes
  • Auto calibration: power/flow electronic real time control
  • Power supply system: the instrument can be charged continuosly by AC powered source 110/240 Volt 50/60 Hz or by rechargeable batteries (inserted inside the air sampler)
  • Cycles battery autonomy: 60.000/70.000 litres
  • Language: English, French, German, Spanish, Italian
  • Manual and automatic passwords
  • Operative aspirating cycles: manual and automatic
  • Memorized data: up to 1.000 samplings
  • Configuration users and places: 100
  • Delayed, remote, start, simultaneous or interval sampling
  • Bluetooth connection or cable for data transfer
  • Data integrity CFR 21
  • CE mark
  • Continuos/trending analysis according USP
  • Dimension: 25x13x18h cm
  • Weight: 3.150 gr
  • Built in ISO 9001 premises

IDENTIFICATION CODES

Code SATELLITE UNIT PACK*
260K SATELLITE UNIT Contact PACK
261K SATELLITE UNIT Petri PACK
262K SATELLITE with HEPA FILTER Contact PACK
263K SATELLITE with HEPA FILTER Petri PACK
258K SATELLITE WALL with HEPA filter Contact PACK
259K SATELLITE WALL with HEPA filter Petri PACK

 (*) each PACK consists of: 1 s/s satellite, 1 s/s aspirating head with s/s cover head, 1 cable connection (5 mt), 1 light carrying case

Code SATELLITE ACCESSORIES
273 S/S HOLDER for lid of Petri plates for satellite
266 S/S RIGID TUBE connection for cable satellite – 170 mm
267 S/S TUBE WALL connection for cable satellite
265 CABLE CONNECTION between the satellite and the command unit – 1 set of 5 meters
266 CABLE CONNECTION between the satellite and the command unit – 1 set of 20 meters
TRIO.BAS SATELLITE UNIT PACK
  
261K TRIO.BAS SATELLITE UNIT Petri PACK
  
  consisting of:  
261 s/s Satellite Petri plate without aspirating head and cable 1
331 s/s ASPI HEAD Petri plate                               1
465 COVER HEAD s/s to protect ASPI HEAD    1
265 Cable connection between the Satellite and the command unit – 1 set of 5 meters 1
397 LIGHT CASE MINI for 1 satellite carrying case – 34x30x16h cm
 1

Vendor Information