Vibration Analyzer MS30
$1,967.85
Vibration Analyzer MS30
Vibration measurement and analysis in the channel, rotational speed measurement, non-contact temperature measurement
Manufacturer: Adelix
Cat. No.: MS30
Applying the device
Vibration analyzer designed to measure general vibration parameters, FFT spectrum analysis of rotating equipment, rapid evaluation according to ISO 10816, balancing of rotating equipment, road condition monitoring, measurement and data collection.
Simple to use and reliable, the built-in software simplifies data management and reporting.
Vibration measurement with a vibrometer is very fast and does not require preparatory work. With the issuance of reports on the condition of the equipment in the enterprise, it is possible to make 100 measurements per shift.
Vibration values measured after some time (for example, after 1 month) make it possible to predict the development of vibration and plan the timing of subsequent repairs. This allows you to significantly save compared to planned repairs.
The values measured by the vibration analyzer can be used to diagnose unit defects using spectral analysis of the signal. For example, by the key and “faulty” lines in the spectrum, it is possible to determine the condition of the bearings, instability, misalignment and other defects.
The main field of application of devices is the operational control of the mechanical condition during the operation, diagnostics, maintenance and repair of equipment: bearings, gears, turbines, generators, fans, pumps, rotors, distribution plants, ball mills, rolling mills, gearboxes, conveyors, motors, blowers and many other equipment. It applies to tracking both entire structures and individual items.
Vibration analyzers of the ADL MS series are used in metallurgy, mechanical engineering, petrochemical, light and defense industries, thermal and nuclear energy, service to equipment of agricultural complexes, residential and communal services, and transportation.
- Description
- Size Guide
- Additional information
- Features
- Vendor Info
- More Products
Description
Vibration Analyzer MS30
Vibration measurement and analysis in the channel, rotational speed measurement, non-contact temperature measurement
Vibration Analyzer MS30
Applying the device
Vibration analyzer designed to measure general vibration parameters, FFT spectrum analysis of rotating equipment, rapid evaluation according to ISO 10816, balancing of rotating equipment, road condition monitoring, measurement and data collection.
Simple to use and reliable, the built-in software simplifies data management and reporting.
Vibration measurement with a vibrometer is very fast and does not require preparatory work. With the issuance of reports on the condition of the equipment in the enterprise, it is possible to make 100 measurements per shift.
Vibration values measured after some time (for example, after 1 month) make it possible to predict the development of vibration and plan the timing of subsequent repairs. This allows you to significantly save compared to planned repairs.
The values measured by the vibration analyzer can be used to diagnose unit defects using spectral analysis of the signal. For example, by the key and “faulty” lines in the spectrum, it is possible to determine the condition of the bearings, instability, misalignment and other defects.
The main field of application of devices is the operational control of the mechanical condition during the operation, diagnostics, maintenance and repair of equipment: bearings, gears, turbines, generators, fans, pumps, rotors, distribution plants, ball mills, rolling mills, gearboxes, conveyors, motors, blowers and many other equipment. It applies to tracking both entire structures and individual items.
Vibration analyzers of the ADL MS series are used in metallurgy, mechanical engineering, petrochemical, light and defense industries, thermal and nuclear energy, service to equipment of agricultural complexes, residential and communal services, and transportation.
Features and functions of the device:
- Measurement of vibration rate, vibration displacement and vibration acceleration;
- the possibility of obtaining vibration change trends using special software;
- Method of shock pulses to determine the condition of bearings;
- Spectral vibration analysis (fast Fourier transform);
- Analysis of time signal;
- Envelope analysis to determine the condition of roller and sliding bearings;
- Display of RMS and peak vibration values;
- Non-contact infrared tachometer for measuring the speed of rotation;
- Phase measurement;
- Measurement in acceleration/end mode;
- Dynamic balancing in their support (up to 8 correction planes);
- Internal battery;
- Easy and intuitive control;
- Dust and moisture protection design of keyboard, screen and connectors;
- Brilliant display.
The introduction of ADL series vibrometers in enterprises will ensure:
- significantly increase the reliability and service life of the equipment,
- To eliminate the risk of emergency situations and to ensure the uninterrupted operation of the enterprise,
- to detect the increased level of vibration in a timely manner,
- increase profits by reducing the cost of unforeseen repairs and downtime.
Properties
| PARAMETERS | VALUE |
| ADL 30 AD | |
| Number of vibration channels | 1 |
| Availability of speed channels | + |
| Temperature measurement | + |
| Frequency range | 1… 10000Hz |
| Vibration acceleration measuring range | Up to 200m/s2 |
| Vibration rate measuring range | Up to 200 mm/s |
| Displacement measuring range (hill to top) | Up to 2000 microns |
| Measurement error | Up to 5% |
| Possibility of balancing | – |
| Temperature measuring range | -70…+380°C |
| Speed measuring range | 10… 200000 rpm |
| FFT spectral analysis | 400, 800, 1600 lines in the spectrum |
| Memory | 4 cigabytes |
| PC communication and charging | USB |
| View | color, 128×160 dots |
| Battery | Internal, LiPo |
| Terms of Use | 0°C to 50°C Humidity up to 80% |
| Overall dimensions | 132x70x33mm |
| Weight | 150g |
Delivery content
- indicator block ADL MS;
- Accelerometer
- 5 m cable to vibration sensor
- magnet for attaching the vibration sensor
- Optical probe, magnetic stand (version ADLMS 30, ADLMS 32);
- probe built-in temperature sensor (version ADLMS 30)
- Network USB charger;
- USB cable;
- software CD
- instruction manual;
- Carrying case.
Additional information
| Ultrasonic Thickness Gauge ADL-UT20 | 2 Sensors, 3 Sensors |
|---|
- Measurement of vibration rate, vibration displacement and vibration acceleration;
- the possibility of obtaining vibration change trends using special software;
- Method of shock pulses to determine the condition of bearings;
- Spectral vibration analysis (fast Fourier transform);
- Analysis of time signal;
- Envelope analysis to determine the condition of roller and sliding bearings;
- Display of RMS and peak vibration values;
- Non-contact infrared tachometer for measuring the speed of rotation;
- Phase measurement;
- Measurement in acceleration/end mode;
- Dynamic balancing in their support (up to 8 correction planes);
- Internal battery;
- Easy and intuitive control;
- Dust and moisture protection design of keyboard, screen and connectors;
- Brilliant display.
The introduction of ADL series vibrometers in enterprises will ensure:
- significantly increase the reliability and service life of the equipment,
- To eliminate the risk of emergency situations and to ensure the uninterrupted operation of the enterprise,
- to detect the increased level of vibration in a timely manner,
- increase profits by reducing the cost of unforeseen repairs and downtime.
Properties
| PARAMETERS | VALUE |
| ADL 30 AD | |
| Number of vibration channels | 1 |
| Availability of speed channels | + |
| Temperature measurement | + |
| Frequency range | 1… 10000Hz |
| Vibration acceleration measuring range | Up to 200m/s2 |
| Vibration rate measuring range | Up to 200 mm/s |
| Displacement measuring range (hill to top) | Up to 2000 microns |
| Measurement error | Up to 5% |
| Possibility of balancing | – |
| Temperature measuring range | -70…+380°C |
| Speed measuring range | 10… 200000 rpm |
| FFT spectral analysis | 400, 800, 1600 lines in the spectrum |
| Memory | 4 cigabytes |
| PC communication and charging | USB |
| View | color, 128×160 dots |
| Battery | Internal, LiPo |
| Terms of Use | 0°C to 50°C Humidity up to 80% |
| Overall dimensions | 132x70x33mm |
| Weight | 150g |
