Voltage Testers P-4
$195.25
VOLTAGE TESTER
MODEL: P-4
MANUFACTURER: SONEL
Functions of the P-4 Voltage tester are:
- automatic voltage test up to 1000 V AC/DC
- optical indication by a LED bar
- sound indication when dangerous voltage levels of 50 V AC and 120 V DC are exceeded
- RCD trip test with switchable load
- automatic continuity test upon connection to the object
- 2-pole test of phase rotation direction
- single-pole indication of 100 V presence
- HOLD function for freezing the measurement results
- robust, two-component housing protecting from mechanical damages and impacts
- integrated torch light for tests in poorly lit areas
- IP65 ingress protection guarantees protection against dust and water
- safety provided by measuring class compliant with CAT IV 600 V and CAT III 1000 V standards.
- Description
- Size Guide
- TECHNICAL INFORMATION FOR P-4 VOLTAGE TESTER
- Vendor Info
- More Products
Description
SONEL P-4 VOLTAGE TESTER
Sonel P-4 voltage tester is reliable, particularly durable and safe 2-pole testers, which enable testing voltage, circuit continuity and phase sequence. They have been designed for use in extreme conditions both in industry and commercial applications. Advanced technology, a high level of safety and user-friendliness are the key features of the P-line voltage testers.
P-line voltage testers allow to check the RCD in a fully controllable way. With buttons on both probes, the user can reduce the internal impedance of the instrument, which makes it possible to trip the RCD. Additionally, pressing both buttons activates an additional load point – a vibration motor. In this way, voltage can be measured in a tested
circuit with no impact of stray currents on the result.
The housing of the P-4 voltage tester has been designed for use in harsh industrial environments, where the application of personal protection equipment, such as voltage insulation safety gloves, is required. At the same time, the instrument’s ergonomic shape allows for one hand use.
The P-4 Voltage tester is provided with a set of test probes. The probes reduce metal exposure to 4 mm length, which eliminates the risk of accidental contact with the wrong conductor when performing measurements on a wire harness.
Additional screw-on metal adapters are used for applications where tips with 4 mm diameter are required. It is particularly important for tests in electrical sockets, where the user must be sure that contact between the probe and the conductor is kept. All elements of the set are stored in a special case so the probe tips can be replaced when needed. The case also includes an adapter that is helpful for unlocking the UK-type sockets.
Functions and attributes of the P-4 voltage tester
- automatic voltage test up to 1000 V AC/DC
- optical indication by a LED bar
- sound indication when dangerous voltage levels of 50 V AC and 120 V DC are exceeded
- RCD trip test with switchable load
- automatic continuity test upon connection to the object
- 2-pole test of phase rotation direction
- single-pole indication of 100 V presence
- HOLD function for freezing the measurement results
- robust, two-component housing protecting from mechanical damages and impacts
- integrated torch light for tests in poorly lit areas
- IP65 ingress protection guarantees protection against dust and water
- safety provided by measuring class compliant with CAT IV 600 V and CAT III 1000 V standards.
TECHNICAL INFORMATION FOR P-4 VOLTAGE TESTER
>AC and DC voltage indication:
- on the analog bar graph: 12, 24, 50, 120, 230, 400, ≥690 V,
- determination of alternating voltage or direct voltage polarization.
>Continuity test:
- indication for resistance R ≤ 400 kΩ,
- optical and acoustic indication.
>Phase sequence test;
- phase sequence indication for voltage U> 100 V.
>Single-pole phase test:
- optical and acoustic indication for voltage U> 100 V.
>RCD trip test:
- RCD test for IΔn ≤30 mA.
>Operating frequency range: 16..400 Hz.
>Measurement category in acc. to EN 61010-1: CAT III 1000 V, IV 600 V.
>Ingress protection in acc. to EN 60529: IP65.
>Type of insulation acc. to EN 61010-1: double, class II.
>Power supply: 2 x LR03 AAA 1,5 V (recommended alkaline cells).
>Working / storage temperature: -15..+55°C / -20..+70°C.
>Dimensions: 275 x 82 x 36 mm.
>Weight without batteries: 267 g.
>Measuring tips: Ø2 mm/ Ø 4 mm/dł. 4mm (GS38).
>Backlight measuring place: integrated torch.
>Standard compliance: EN 61326-1, EN 61326-2-2, EN 61010-1, EN 61243-3.
>Warranty: 2 years.
Vendor Information
-
Instrumentation Products, Flow Instruments, Flow MeterTruflo® OBS Pressure Gauge + Gauge Guard | PP
$310.36Select options This product has multiple variants. The options may be chosen on the product pageQuick View -
