SIGNAL TRANSMITTER – CTI-01/S (housing IP56, wall installation)
MANUFACTURER: STEIEL ELETTRONICA Srl
CAT NO: CTI-01/S
- Description
- Size Guide
- SPECIFICATIONS
- DOWNLOADS
- Vendor Info
- More Products
Description
SIGNAL TRANSMITTER – CTI-01/S (housing IP56, wall installation)
DESCRIPTION OF SIGNAL TRANSMITTER – CTI-01/S (housing IP56, wall installation)
The CMK50 cell uses the inductive working principle to perform conductivity measurements of liquids, up to 500 mS/cm. The cell can be installed in immersion or in a flow-through probe-holder. Moreover, mounting (PP or steel) accessories for in-line installation. Principle of operation: the cell is built with two internal electrical coils, transmitter and receiver.
When the transmitter winding is solicited by a suitable electric current, it generates a magnetic field, which create an electric current in the liquid, proportional to the specific conductivity of the measured fluid. This current is detected by the receiver winding. Furthermore, a specific inbuilt sensor detects the liquid temperature and automatically thermo-compensates readings, providing the final actual value of the fluid conductivity
TECHNICAL FEATURES
- Measurements with inductive method, up to 500 mS/cm
- PEEK body with ½” threading
- Operating temperature: max 120 °C
- Inbuilt temperature sensor for thermo-compensated readings
- Standard cable: 10 meters
- Immersion or flow type installation with proper probe holders
- In-line installation with mounting accessories in PP or stainless steel
- Signal transmitter with 4-20 mA output, to be ordered according to the needed measurement range
MODELS
- Signal transmitter, 230V~, output 4-20 mA, range up to 5 mS/cm
- Signal transmitter, 230V~, output 4-20 mA, range up to 10 mS/cm
- Signal transmitter, 230V~, output 4-20 mA, range up to 20 mS/cm
- Signal transmitter, 230V~, output 4-20 mA, range up to 50 mS/cm
- Signal transmitter, 230V~, output 4-20 mA, range up to 100 mS/cm
- Signal transmitter, 230V~, output 4-20 mA, range up to 200 mS/cm
- Signal transmitter, 230V~, output 4-20 mA, range up to 500 mS/cm
- Cell Body: PEEK
- Installation: ½” G connection; immersion or down-flow probe holder
- Thermo-compensation: automatic, through inbuilt sensor
- Working Temperature: max 120°C
- Cable: 10 m
- Connection: via proper signal transmitter (CTI-01 series)
Vendor Information
- Address:
